Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Newport Beach, CA
Chimney repair in Newport Beach usually costs between $275 and $2,600 depending on whether we’re replacing a cap, rebuilding a crown, or installing a liner. Most of the work we do in Newport Beach is driven by salt air and marine moisture rather than heavy wood-burning use, which means the damage we see trends toward corroded metal components and spalled masonry rather than creosote buildup. Supreme Chimney Sweep has served Newport Beach since 2012, and we handle inspection, cleaning, repair, and dryer vent work under one roof so you’re not juggling multiple contractors when something needs fixing. Call (833) 589-8164 for a free estimate.
Why Newport Beach Homes Are Different
Newport Beach’s fireplace stock skews heavily toward decorative and gas-fired units, especially in bayfront and coastal homes where wood burning is rare and often restricted by local air-quality rules. That changes the job. On Balboa Island and the Peninsula, we routinely find rusted-through chimney caps and deteriorated mortar crowns from salt air rather than thick creosote glaze, because many fireplaces are gas inserts or seldom-used wood burners. The marine layer, onshore breeze, and winter rain driven off the Pacific corrode spark arrestors, chase covers, and exterior masonry crowns noticeably faster here than they do five miles inland.
Housing age plays a role too. Newport Beach mixes original 1950s-70s beach cottages with large Mediterranean, Cape Cod, and custom rebuilds on Lido Isle, the Back Bay, and the bluff-top streets. Many of those older cottages have prefab fireboxes that were installed decades ago and never updated, while the custom rebuilds often have masonry chimneys added or replaced during remodels. That means we see both ends of the spectrum: outdated prefab units with rusted components and newer masonry work that still takes a beating from the marine environment. What we rarely see is a chimney caked with creosote from a winter of heavy burning. Instead, the call is usually about a cap that’s rusted through, a crown that’s spalling, or a gas insert that hasn’t been serviced in years.
Styles & brands we work with
Our Main Newport Beach Services
The two calls we get most from Newport Beach homeowners are chimney sweeping and dryer vent cleaning, and both matter for different reasons in this climate.
Chimney Sweep in Newport Beach
Chimney sweeping in Newport Beach is less about heavy creosote removal and more about inspecting gas inserts, clearing debris from prefab fireboxes, and checking caps and crowns for salt-air damage. We sweep light creosote and soot, remove bird nests and wind-blown debris, and document everything with photos so you can see exactly what we found. On Peninsula and Balboa Island homes, we pay extra attention to rust on metal components that other markets never deal with. Chimney Sweep in Newport Beach
Dryer Vent Cleaning in Newport Beach
Dryer vent cleaning matters here because many Newport Beach laundry rooms are in tight interior spaces or against exterior walls that face the marine breeze, and lint plus salt air means clogs form differently than inland. We clean the full vent run from dryer to exterior termination, clear blockages, and confirm airflow with a before-and-after measurement. It’s a fire-prevention service we take seriously, not an add-on. Dryer Vent Cleaning in Newport Beach
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Newport Beach
Chimney repair in Newport Beach is most often about the damage salt air and marine moisture do to metal and masonry components. Homes built in the 1950s through the 1970s across the Balboa Peninsula, Balboa Island, and the Back Bay neighborhoods frequently have original prefab fireboxes and chase covers that have been corroding for decades, while custom rebuilds on Lido Isle and the bluff tops often need crown and flashing work after just a few winters of Pacific-driven rain. Because we carry professional-grade components and liners on our trucks, discovered damage doesn’t mean a second appointment or a handoff to another contractor. Our full-service Chimney Repair capability means we fix what we find, same visit, same company.
Chimney Cap Installation
Signs you need it
You see rust streaks on the chase cover, hear wind noise inside the firebox, or find bird nesting material at the top of the flue.
What it costs in Newport Beach
Chimney cap installation in Newport Beach typically runs $180 to $560 depending on the flue size and whether we’re fitting a standard cap or a custom chase cover for a prefab box.
How we do it
We measure the flue or chase opening, match the cap material to the exposure (copper or powder-coated steel for salt-air zones), and secure it with stainless hardware so it doesn’t loosen in marine wind.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of the chimney has cracks, is spalling in chunks, or is pooling water around the flue tile after rain.
What it costs in Newport Beach
Chimney crown repair in Newport Beach typically costs between $425 and $1,100 depending on how much of the existing crown needs to be ground out and recast.
How we do it
We remove deteriorated crown material, build a form for the proper overhang and drip edge, and pour a crown mix that’s formulated to shed water away from the flue and masonry.
What Chimney Repair Costs in Newport Beach
| Item | Typical range in Newport Beach |
|---|---|
| Chimney cap installation | $180 – $560 |
| Chimney crown repair | $425 – $1,100 |
| Chimney liner installation | $1,800 – $5,200 |
Prices shift based on roof access, chase height, and whether the home is on a tight Peninsula lot or a larger Lido Isle or Back Bay property. We quote a flat price before any work begins, and nothing gets recommended without camera evidence you can review yourself.
How often should I have my chimney inspected in Newport Beach?
Once a year, even with light use, because salt air and moisture in marine zones corrode caps, chase covers, and masonry crowns faster than inland climates. An annual inspection in Newport Beach catches rust and spalling before water gets into the chase or firebox.
Can you fix salt-air corrosion without replacing the whole chimney?
Usually yes. Corroded caps and chase covers get replaced, spalled crowns get recast, and damaged flue liners can often be resurfaced with HeatShield rather than fully replaced. Call (833) 589-8164 and we’ll tell you what actually needs doing after the camera inspection.
Brands We Service in Newport Beach
We stock and install components from Olympia Chimney, Famco, and Copperfield, plus DuraFlex liner systems for re-lining jobs. These are the same professional-grade lines specialty chimney contractors specify nationwide, and carrying them on our trucks means we can complete most Newport Beach repairs the same day we diagnose them. See our brands for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Newport Beach, CA
| Service | Typical range in Newport Beach |
|---|---|
| Chimney sweep | $149 – $329 |
| Chimney inspection (Level 1) | $99 – $250 |
| Chimney cap installation | $180 – $560 |
| Chimney cap replacement | $225 – $675 |
| Chimney crown repair | $425 – $1,100 |
| Chimney flashing repair | $300 – $850 |
| Chimney liner installation | $1,800 – $5,200 |
| Dryer vent cleaning | $89 – $189 |
In Newport Beach, prices push toward the upper end of these ranges when roof access is steep on bluff-top streets, when marine corrosion has spread across a chase cover, or when prefab components from the 1960s and 70s need custom fabrication to match. We quote a flat price before we start, so the number we give you is the number you pay.
Neighborhoods We Serve in Newport Beach
We work across Newport Beach, from the tight lots of Balboa Island and the Peninsula to the larger properties on Lido Isle, the Back Bay, and the bluff-top neighborhoods above the coast. Our techs know the parking and access constraints of beach cottages and the roof pitches of custom rebuilds equally well.
- Balboa Island
- Balboa Peninsula
- Lido Isle
- Back Bay
- Newport Coast
Response time across the city is typically within a few business days, and we can often schedule faster when a cap has rusted through and water is getting into the firebox.
Service Area – Cities Near Newport Beach
Supreme Chimney Sweep serves Newport Beach and the surrounding coastal and inland Orange County communities. If you’re in Costa Mesa, CA, San Joaquin Hills, CA, Irvine, CA, or Aliso Viejo, CA, we can schedule the same full-service chimney and dryer vent work. Call (833) 589-8164 to confirm coverage for your neighborhood.
Serving Newport Beach, CA — Our Local Coverage Area
We’re based in the Newport Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Newport Beach
Most chimney cap replacements, crown repairs, and liner installations don’t require a city permit in Newport Beach, but masonry rebuilds or structural changes might. We’ll tell you during the inspection if your job falls under a permit trigger, and we handle the paperwork when it does.
We cover all Newport Beach ZIP codes: 92663, 92658, 92659, and 92660, including Balboa Peninsula, Balboa Island, Lido Isle, the Back Bay, and Newport Coast. If you’re unsure whether your street is in our service area, call (833) 589-8164 and we’ll confirm in minutes.
We schedule most Newport Beach appointments within a few business days, and we prioritize calls where a cap has failed or water is actively entering the firebox. If salt-air corrosion has opened a gap, call (833) 589-8164 and we’ll work you in as quickly as the schedule allows.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newport Beach Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Bethany Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Adam Novak"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Emily Tran