Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irvine, CA
Chimney repair in Irvine usually comes down to one of two things: a rusted prefab cap or flashing that has pulled away from a stucco chase. Supreme Chimney Sweep has served Irvine since 2012, and most of the repair work we do here involves factory-built metal flue systems in 1980s to 2000s tract homes rather than the century-old masonry stacks you see in older California cities. Whether it is a cracked crown, a failed liner, or a cap clogged with eucalyptus debris, we inspect, repair, and restore and we carry the parts to fix it the same day. Call (833) 589-8164 for a free estimate.
Why Irvine Homes Are Different
Irvine was largely master-planned from the 1970s onward, which means the housing stock tells a very different chimney story than most of Southern California. The majority of homes here have factory-built fireplaces with short metal flues running through wood-framed chases wrapped in stucco. These systems do not age the way masonry chimneys do, but they have their own failure points: rusted galvanized caps, warped chase tops, deteriorated flashing at the roofline, and creosote that builds slowly because fireplaces only get used a handful of weeks each year. The city’s heavy eucalyptus and sycamore canopy means caps clog with leaves and seed pods even in months when nobody has lit a fire. During the dry Santa Ana wind season, that debris sits in direct contact with the flue exit, which raises the stakes when an occasional winter fire does run. Many of the newer villages, especially in 92618 and 92620, are dense townhome and condo communities where chimneys are short, shared, and often governed by HOA rules about rooftop work visibility and contractor approvals.
Styles & brands we work with
Our Main Irvine Services
Most Irvine homeowners call us for one of two reasons: a fireplace that has not been cleaned in years, or a dryer vent that has never been cleaned at all. Both are ventilation fire hazards, and both are handled by the same company.
Chimney Sweep in Irvine
A chimney sweep in Irvine is less about heavy creosote and more about clearing out what has accumulated during the months the fireplace sat idle. We remove soot, inspect prefab flue panels for gaps or rust, clear bird nests from rain caps, and make sure the damper operates correctly. Because Irvine’s coastal climate means fires are occasional rather than nightly, the creosote layer in most local flues stays in the light-to-moderate range, but leaf litter and seed pods from eucalyptus trees are year-round problems. If you have not had the fireplace looked at in two years or more, start here. See Chimney Sweep in Irvine for the full scope and local pricing.
Dryer Vent Cleaning in Irvine
Dryer vent cleaning in Irvine matters because lint does not care how carefully you build a planned community. In townhomes and condos, vent runs are often longer and less direct than in single-family homes, which means lint accumulates faster and airflow drops sooner. We clean the entire run from the dryer to the exterior termination, clear bird and rodent debris from the exterior hood, and leave you with a documented service record that satisfies most HOA maintenance requirements. This is a fire-prevention service, not an upsell. See Dryer Vent Cleaning in Irvine for details on what it costs and how it works.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irvine
Most chimney repair calls in Irvine start with a homeowner noticing water stains on the ceiling near the fireplace, a draft they cannot figure out, or a cap that has rusted through. Because nearly every home here has a factory-built metal flue inside a stucco chase, the repair work focuses on caps, flashing, crowns, and liners rather than brick-and-mortar masonry. When a prefab system leaks, it is usually because the chase top or cap failed and allowed rainwater to run down the flue and into the firebox. If we find damage during an inspection, we can usually fix it the same visit with the parts on the truck, which means no second appointment and no handoff to another contractor. That is the entire point of being Chimney Repair capable from day one.
Chimney Cap Installation
Signs you need it
You have no cap at all, or the existing cap is rusted through, letting rain, leaves, and birds into the flue.
What it costs in Irvine
Chimney cap installation in Irvine typically runs $200 to $650 depending on the flue diameter and whether the cap is standard galvanized or stainless.
How we do it
We measure the flue opening, mount the cap securely to the flue or chase top, and seal the mounting points so water cannot wick underneath.
Chimney Cap Replacement
Signs you need it
Heavy rust, missing mesh, or a cap that has blown off entirely during a Santa Ana wind event.
What it costs in Irvine
Chimney cap replacement in Irvine runs $180 to $560 including removal of the old cap and disposal.
How we do it
We remove the failed cap, check the flue opening for damage, install a correctly sized replacement, and confirm the spark arrestor mesh is intact.
Chimney Liner Installation
Signs you need it
Visible rust flakes in the firebox, flue tiles that are cracked or missing, or an inspection that shows gaps in the liner system.
What it costs in Irvine
Chimney liner installation in Irvine usually runs $2,100 to $4,800, with prefab flue relines on the lower end and full stainless liner pulls on the higher end.
How we do it
We remove the old liner or damaged flue panels, pull a correctly sized DuraFlex stainless liner through the chase, and re-terminate the top with a new cap.
What Chimney Repair Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Chimney cap installation | $200 – $650 |
| Chimney cap replacement | $180 – $560 |
| Chimney liner installation | $2,100 – $4,800 |
Prices shift based on access. A chase top on a steep two-story roof in Quail Hill or Turtle Rock costs more to reach safely than a single-story townhome off Culver Drive. We quote a firm price before any work starts.
Do I really need a new liner, or is this an upsell?
You should only accept a liner recommendation when you can see the damage yourself on camera. We do not recommend liners without photo evidence from the inspection, and if the flue is salvageable, we will tell you that first and show you why.
Can you repair a prefab chimney, or do I need a mason?
We repair prefab systems every week in Irvine. Factory-built fireplaces need caps, chase covers, flashing, and liners, not brick-and-mortar work. If the chase stucco is cracked, we coordinate the correct repair and handle the flue components ourselves. Call (833) 589-8164 for an exact quote.
Brands We Service in Irvine
We install the same parts serious chimney contractors specify nationwide: DuraFlex liners, Gelco and Olympia Chimney caps and chase covers, and HeatShield resurfacing material. The parts we stock in our Irvine service vehicles are professional-grade, not big-box substitutes. See our brands for the full line.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Chimney sweep | $169 – $229 |
| Level 1 inspection | $99 – $199 |
| Level 2 inspection | $249 – $450 |
| Dryer vent cleaning | $99 – $169 |
| Chimney cap installation | $200 – $650 |
| Chimney cap replacement | $180 – $560 |
| Chimney liner installation | $2,100 – $4,800 |
| Firebox repair | $450 – $1,400 |
What pushes a price up in Irvine is usually height and access. A two-story Spanish-style tract home with a steep roofline and a chimney in the middle of the roof costs more to work on safely than a single-story home with a chase at the eave. You get a firm price before we start, and the quote includes everything: labor, parts, cleanup, and disposal.
Neighborhoods We Serve in Irvine
We cover all of Irvine, from the older villages like Woodbridge and Northwood to newer developments in Portola Springs and the Great Park Neighborhoods.
- Woodbridge
- Northwood
- Quail Hill
- Turtle Rock
- Great Park Neighborhoods
We schedule service across the city Monday through Saturday, and most Irvine appointments are handled within a few days of the call. HOA-restricted villages are easy to work with, we know the access rules and we arrive with the paperwork already in order.
Service Area – Cities Near Irvine
Our service area extends beyond Irvine into the surrounding South Orange County communities. We regularly serve homes in Aliso Viejo, CA for townhome and condo flue work, San Joaquin Hills, CA for hillside homes with steeper access, Laguna Woods, CA for older construction with more traditional chimney setups, and Costa Mesa, CA for single-family homes with the same Mediterranean-style prefab systems we see across Irvine.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irvine
For regular sweeping and cap work, almost never. For visible rooftop work on shared structures in newer villages like 92618 or 92620, some HOAs want a licensed and insured contractor on file. We are licensed and insured, and we can provide documentation if your association asks for it.
Most Irvine appointments are scheduled within two to five business days. During the fall, before the burning season starts, we recommend calling early in the week to get a same-week slot. The phone line is open Monday through Saturday.
We cover all four Irvine ZIP codes: 92617, 92618, 92619, and 92620. Our techs are based in the area and know the HOAs, the rooflines, and the common chimney issues in each village.
If your fireplace or dryer vent needs work, call (833) 589-8164 today. We will schedule a visit, inspect the system, and give you a firm price before any work begins. Whether it is a sweep, a repair, or a liner replacement, Supreme Chimney Sweep handles it with professional-grade parts properly installed.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Emily Tran"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Justin Lin"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Greg Norris