Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Irvine
A chimney sweep in Irvine typically runs $189 – $289 for a standard prefab fireplace cleaning, and most appointments wrap up in 60 – 90 minutes. If you live in a village like Woodbridge, Westpark, or Northwood and haven’t had your flue checked in over a year, the salt air near the coast is already working on your metal components. Call (833) 589-8164 and we’ll get you on the schedule, usually within a few days. We know Irvine’s housing stock because we work in it every week, from the 1980s tract homes in Turtle Rock to the newer townhome clusters off Irvine Boulevard.
Most of what we see here isn’t creosote glaze from heavy burning. It’s corrosion on galvanised caps and flashing, debris packed into spark arrestors from eucalyptus and sycamore trees, and the slow rust accumulation that comes from living five miles from salt water. You need a sweep who knows the difference, because misdiagnosing a corroded cap as a failed liner costs Irvine homeowners thousands of dollars they didn’t need to spend.
Why Supreme Chimney Sweep Is Irvine’s Preferred Chimney Sweep Company
Brent Calloway built Supreme Chimney Sweep around a simple idea: when we find damage, we fix it, same visit. No handing you a report and telling you to call someone else. Our trucks carry DuraFlex in Irvine liner components, stainless caps from Olympia Chimney and Copperfield, and the caulks and sealants that hold up to Irvine’s coastal air. That matters here specifically because discovered damage on Irvine chimneys is common, and you shouldn’t wait a second appointment to address it.
We service the full Chimney Sweep scope: inspection, cleaning, repair, and dryer vent cleaning. Homeowners in Irvine call us because they want one company that can diagnose a rusted cap, sweep the flue, and replace the flashing without bringing in a second contractor. Reviews from Irvine customers consistently mention two things: we show up when we say we will, and we explain what we’re seeing in plain language. No scare tactics. If the flue liner is sound, we tell you that plainly and show you the camera footage to prove it.
Response time to Irvine is typically one to three business days. We route crews from Carlsbad north through the 5 and 405, and we batch Irvine appointments by village to keep scheduling efficient. If you’re in Quail Hill or Portola Springs, expect us mid-morning. If you’re near UCI or the 92697 zip, we’ll usually slot you in earlier or later to avoid campus traffic.
Styles & brands we work with
Chimney Services in Irvine
Chimney Services in Irvine mean something different than in older California cities. Your chimney is probably a factory-built metal flue system installed in a 1980s – 2010s tract home, and the service work that keeps it safe is inspection, cap and flashing assessment, creosote removal, and dryer vent cleaning. A Level 1 inspection runs $149 – $199. A Level 2 inspection, which we recommend whenever water stains appear on the firebox or you’ve just bought the home, runs $299 – $399. These prices include the camera work, and we walk you through the footage before we recommend anything.
Inspection and Creosote Removal
Irvine fireplaces see light use: maybe a dozen burns a year, mostly around the holidays and a few cool evenings during the Santa Ana season. That means creosote accumulates slowly and rarely reaches the glaze stage in prefab units. What you’ll actually see is first-degree creosote, a flaky black dust that brushes out in one pass. We remove it, bag it, and leave the firebox clean.
Cap, Crown, and Flashing Repair
The components that fail first on Irvine chimneys are the galvanised metal parts exposed to salt air. Caps rust through within a decade in many 92603 and 92602 homes. Crowns on stucco-clad chimneys develop hairline cracks from thermal cycling. Flashing lifts where it meets the tile roof. We replace galvanised with stainless, reseal crowns with flexible sealant rated for coastal conditions, and get the system water-tight before the next rain.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Sweep Certified in Irvine
Chimney Sweep Certified work in Irvine is verification-heavy by necessity, because the city’s HOA-governed villages and its particular failure modes demand documentation. We’re authorised to install and service DuraFlex flexible liner systems, HeatShield liner resurfacing, and components from Gelco, Olympia Chimney, and Copperfield. A standard sweep with certification documentation runs $189 – $289. A sweep paired with a Level 2 camera inspection runs $349 – $449. Every job includes a written report with photos, which most Irvine HOAs accept without issue when cap replacement or flashing work needs to happen.
Sweep and Certify
We sweep the flue, remove debris from the cap and spark arrestor, and provide a dated certificate of cleaning. This is what most HOA-governed Irvine villages want to see when they require annual chimney maintenance. We’re familiar with the documentation expectations in Woodbridge, Northwood, and University Park, and we format our reports accordingly.
Repair-Capable Sweeps
Most chimney sweeps in Orange County clean and leave. We clean and then we inspect for what salt air is doing to your components, because in Irvine the cleaning is rarely the end of the story. If a cap is rusted through, we have stainless replacements on the truck. If the crown is cracked, we seal it same day. If the liner is damaged, we’ll show you the camera footage and explain whether HeatShield resurfacing can restore it or a DuraFlex liner replacement is the honest fix.
Trusted Brands We Service in Irvine
We don’t install big-box chimney components on Irvine homes, because the coastal air eats them in five years and you’ll be paying for the same repair again. We stock Olympia Chimney caps and dampers, Copperfield chase covers, and DuraFlex liner systems, the same lines specialty masonry and fireplace contractors specify across Southern California. For Irvine customers, that means when we find a corroded galvanised cap on your Turtle Rock home, the stainless replacement goes on the same day, not in two weeks after a parts order. Professional-grade parts, properly installed, and you won’t be back on the phone with us in three seasons for the same component.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Irvine Homes
- Rusted galvanised caps and flashing. Salt air from the Pacific, carried inland on the same breeze that makes Irvine’s evenings cool, attacks galvanised steel aggressively. We regularly replace caps on 10 – 15 year old homes where the flue liner itself is still perfectly sound.
- Water stains on firebox ceilings. Often misdiagnosed by generalist handymen as liner failure. In most Irvine homes we inspect, the actual cause is a cracked crown or failed flashing. A Level 2 camera inspection sorts this out in minutes.
- Eucalyptus leaves and sycamore pods in the cap and spark arrestor. Irvine’s tree canopy is everywhere, and these trees drop debris year-round, not just in fall. Even homes that haven’t lit a fire in months can have a packed spark arrestor blocking the draft.
- HOA compliance complications. Villages like Turtle Rock, Woodbridge, and Westpark have architectural guidelines for visible cap replacements and rooftop work. We document everything with photos and use finishes that satisfy HOA review boards, which saves you the back-and-forth.
Pricing for Chimney Sweep in Irvine, CA
A standard chimney sweep in Irvine runs $189 – $289, depending on fireplace type and how much debris has packed into the cap. A sweep plus Level 2 camera inspection runs $349 – $449. If we find a corroded cap, stainless replacement typically adds $150 – $300 depending on the flue diameter. Crown resealing runs $200 – $400. Full HeatShield liner resurfacing, which most Irvine homes never need, starts around $1,800 – $2,500, and we’ll only quote it if the camera shows genuine liner damage. Call (833) 589-8164 for a free estimate, and we’ll give you a flat price before we book anything. No surprises, no pressure, and you’ll see the footage before you spend a dollar on repairs.
We Also Serve Cities Near Irvine
Our crews cover Irvine and the surrounding Orange County communities: Aliso Viejo, San Joaquin Hills, Laguna Woods, and Costa Mesa. If you’re in a neighboring town and need a Chimney Sweep in Irvine or local service, we’re already working in your area most weeks and can often combine trips to keep scheduling quick.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Irvine
Every 12 months, even if you rarely burn. The salt air corrodes metal components continuously, regardless of fireplace use. Annual inspection catches cap and flashing corrosion before water gets into the firebox or smoke chamber. Call (833) 589-8164 for scheduling.
Yes. Your flue liner is usually stainless or an aluminised alloy and holds up well. The galvanised cap, chase cover, and flashing are the weak points, and they corrode within a decade in many Irvine neighborhoods. The liner stays sound while the exterior components crumble. We replace galvanised with stainless and the problem doesn’t come back.
First-degree creosote is a flaky black dust that brushes out easily. Glaze, or third-degree creosote, is a tar-like hardened deposit that’s rare in Irvine because homeowners here don’t burn frequently enough to create it. Most Irvine chimneys we sweep have first-degree creosote at most, and the bigger issue is usually debris and rust. Get an exact assessment by calling (833) 589-8164.
Yes, and they often do. Many Irvine villages require approved contractors for rooftop-visible work, and some have finish requirements for cap replacements. We provide photo documentation and use finishes that meet standard HOA architectural guidelines. We’ve worked in Woodbridge, Turtle Rock, and University Park enough to know what documentation each management company expects.
Yes. Irvine’s extensive eucalyptus and sycamore canopy drops leaves, bark, and seed pods year-round. These pack into caps and spark arrestors, block the draft, and create a fire hazard when the first Santa Ana winds arrive and you light that first fire of the season. We clear them with every sweep. Call (833) 589-8164 for a free estimate, and we’ll get it handled before the winds pick up.
In the Turtle Rock village, zip 92603, we inspected a 1988 Mediterranean-style home with a DuraFlex flue and found the original galvanised chimney cap rusted through, dropping flakes onto the damper. We replaced it with a stainless cap, resealed the flashing with silicone, and swept first-degree creosote from the firebox. No damage to the flue liner. But the cap and crown needed immediate attention to stop water intrusion, and that’s the pattern we see across Irvine: the liner is fine, the exposed metal is not.
If you’re in Irvine and you haven’t had your chimney inspected in over a year, call (833) 589-8164 for a free estimate. We’ll schedule you within days, inspect what salt air has done to your cap and flashing, and only recommend work the camera footage proves you need. One call covers your chimney and your dryer vent, both fire hazards, both handled.
Written by Brent Calloway, Owner at Supreme Chimney Sweep, serving Irvine since our first route expansion into Orange County.