Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in San Clemente, CA
Chimney repair in San Clemente usually means dealing with what the ocean does to masonry and metal, not what a winter of fires does to the flue. Salt air, the marine layer, and decades of coastal moisture work their way into Spanish-tile and stucco chimneys in ways homeowners inland rarely see. Supreme Chimney Sweep has served San Clemente since 2012, and we carry DuraFlex, HeatShield, and Olympia Chimney components on the truck so repair work doesn’t require a second appointment. Call (833) 589-8164 when you spot trouble.
Why San Clemente Homes Are Different
San Clemente sits inside a coastal marine-layer zone, and that single fact reshapes almost every chimney job we do here. In the historic Spanish Village by the Sea core and older 92672 neighborhoods, chimneys are typically clay tile or brick wrapped in stucco, paired with clay tile roofs. The persistent damp and salt-laden onshore air cause spalling, where the stucco and mortar slowly crumble and flake away, and efflorescence, that white mineral bloom that signals water moving through masonry. Moisture gets behind cracks, and what starts as a cosmetic mark becomes a structural problem.
Uphill in Talega and Forster Ranch, the homes are newer and the flues are often prefab metal, but they face a different version of the same enemy. Salt air pits and rusts stainless and galvanized flue sections far faster than the dry inland climate would. We regularly find clay tile liners cracked or separated from spalled mortar on the older stucco chimneys, and rust-stained, corroded metal flues in the tract homes. A sweep in, say, Ladera Ranch sees creosote as the main issue. Here, rust, dampness, and masonry decay come first, and a cleaning-only company will miss the damage entirely.
The terrain matters too. San Clemente’s hillside lots mean many chimneys are reached from steep roofs with limited staging space, and the coastal fog keeps tile roofs slick in the morning. We plan jobs around the marine layer because working on a damp clay tile roof at 8 a.m. in June is slower and less safe than waiting a couple hours for the sun to burn through.
Styles & brands we work with
Our Main San Clemente Services
Most San Clemente homeowners call us for one of two reasons: a chimney that has not been swept in years and may have hidden damage, or a dryer vent that has quietly packed with lint behind the wall. Both are fire-safety systems, and both get handled by the same crew.
Chimney Sweep in San Clemente
A proper sweep in San Clemente is an inspection first and a cleaning second. We remove soot and the light creosote that does accumulate, but we are also looking for the salt-driven problems this city is known for: cracked clay tile liners, spalled mortar joints, rusting flue sections, and damp staining inside the firebox. Because we carry repair components on the truck, a discovery during the sweep does not mean waiting for a second company. You can see the full scope of the cleaning process and what we check on our Chimney Sweep in San Clemente page.
Dryer Vent Cleaning in San Clemente
Dryer vents in San Clemente clog the same way they do anywhere, but coastal humidity makes lint cling and mat inside the duct, and longer vent runs are common in hillside and custom homes in 92673. A clogged dryer vent is a leading cause of house fires, and this is not an add-on service for us; it is a documented fire-prevention job with its own inspection standards. The specifics of what we check and how we clean are on the Dryer Vent Cleaning in San Clemente page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in San Clemente
Chimney repair in San Clemente is less about fixing what fire damaged and more about reversing what the ocean has done. The Spanish Colonial and Mediterranean stucco homes built from the 1920s through the 1970s have chimneys that crack and let moisture in, and the salt air works on those cracks until spalling and liner separation follow. Since 2012, our repair work here has centered on restoring those older masonry chimneys and replacing rusted metal components before they fail. We can handle the repair, liner work, and component replacement in one visit because we stock professional-grade parts from DuraFlex, HeatShield, and Olympia Chimney locally. The full scope of our repair capability is detailed on our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
Your chimney has no cap, or the existing one is rusted through, and you have seen water, birds, or debris inside the flue.
What it costs in San Clemente
Chimney cap installation in San Clemente typically runs $180 to $340 for a standard cap, with custom or multi-flue caps running $300 to $650.
How we do it
We measure the flue opening, source the correct cap from our Olympia Chimney or Gelco stock, secure it to the crown or flue tile with mechanical fasteners, and verify the draft is unchanged.
Chimney Cap Replacement
Signs you need it
Your current cap is rusted, warped, or the mesh spark arrestor has holes, and you have noticed water staining in the firebox or animal activity in the flue.
What it costs in San Clemente
Replacing a failed chimney cap in San Clemente costs $200 to $360 for most single-flue caps, with larger or multi-flue replacements running $350 to $700.
How we do it
We remove the old cap, inspect the flue tile and crown underneath, install a properly sized replacement from our stocked Olympia Chimney and Gelco components, and check the fit so it will not shift in San Clemente’s onshore winds.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, damp drywall in the attic, or rusted, cracked, or pulled-away flashing where the chimney meets the roof.
What it costs in San Clemente
Flashing repair in San Clemente typically runs $350 to $750, with full re-flashing jobs on stucco chimneys between $750 and $1,500 depending on roof access and tile removal.
How we do it
We remove the damaged flashing, inspect the surrounding decking and masonry for hidden rot or spalling, install new step and counter flashing with proper sealant, and re-bed any displaced clay tiles.
Chimney Crown Repair
Signs you need it
Your concrete crown has visible cracks, is spalled or crumbling, or has pulled away from the flue tile, and you have seen efflorescence or moisture staining on the chimney exterior.
What it costs in San Clemente
Crown repair in San Clemente generally costs $250 to $500 for crack repair and resurfacing, while a full crown rebuild runs $600 to $1,200.
How we do it
We clean and prep the crown surface, fill cracks with an appropriate masonry repair compound, and apply a crown coat that sheds water away from the flue instead of letting it pool and seep into the stucco.
What Chimney Repair Costs in San Clemente
| Item | Typical range in San Clemente |
|---|---|
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $200 – $360 |
| Flashing repair | $350 – $750 |
Does chimney flashing repair usually require roof tile removal in San Clemente?
Not always. On many San Clemente stucco chimneys, flashing can be repaired from the chimney side without disturbing the clay tile roof. But when the flashing runs under the tile course, yes, a few tiles come up and get re-bedded when we are done.
How long do masonry chimney repairs last in a salt-air climate?
Properly done crown and flashing repairs here generally last a decade or more if the moisture entry point is actually sealed. The salt air will always try to find its way back in, so the difference is how the first repair is executed, not whether a second one will ever be needed.
Brands We Service in San Clemente
We stock and install DuraFlex, HeatShield, and Olympia Chimney components, the same lines specialty chimney contractors specify on commercial and high-end residential jobs. Having these parts on the truck in San Clemente means a repair quote on Monday is often a finished repair the same day. See our brands for what we carry and why we choose them.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in San Clemente, CA
| Service | Typical range in San Clemente |
|---|---|
| Chimney sweep (standard) | $160 – $250 |
| Chimney sweep with inspection | $200 – $300 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $200 – $360 |
| Chimney flashing repair | $350 – $750 |
| Chimney crown repair | $250 – $500 |
| Full crown rebuild | $600 – $1,200 |
| Dryer vent cleaning | $125 – $200 |
Prices in San Clemente push toward the higher end on hillside homes where roof access is steep and tile work is required, and on older chimneys that need more masonry prep than expected. We give an upfront price before any work begins, and nothing gets recommended without camera evidence you can see.
Neighborhoods We Serve in San Clemente
We work throughout San Clemente, from the beach-close streets around downtown and the Spanish Village core, up through the hillside neighborhoods and into the newer tracts. If you are not sure whether we cover your street, call us, but the answer is almost certainly yes.
- Talega
- Forster Ranch
- Spanish Village by the Sea
- Coast District
- Rancho San Clemente
Most San Clemente jobs are scheduled within a few days, and we coordinate uphill and roof-access work around the marine layer so the roof is dry when our crew is on it.
Service Area – Cities Near San Clemente
San Clemente sits at the southern edge of Orange County, and we regularly serve homeowners just over the county line and up the coast. If you are in Ladera Ranch, CA, Laguna Beach, CA, Laguna Hills, CA, or Coto De Caza, CA, the same crew that works San Clemente handles your chimney and dryer vent, with the same parts and the same upfront pricing.
Serving San Clemente, CA — Our Local Coverage Area
We’re based in the San Clemente area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in San Clemente
Most San Clemente appointments are scheduled within a few days of your call. Roof-access jobs are planned around the morning marine layer, so a repair on a steep Talega roofline might be an afternoon visit rather than first thing in the morning.
Yes, in many San Clemente communities, especially HOAs in Talega, Forster Ranch, and the hillside tracts, exterior work like caps, crowns, and flashing must be approved in advance. Cap color and material often need to match neighborhood standards, so call your management office before scheduling visible exterior work, and we will work from their specs.
Even with light burning, an annual inspection is smart here because the salt air is working on your chimney constantly. We recommend a sweep every year you burn more than occasionally, and an inspection every year regardless, because rust and spalling do not wait for a cold winter.
If you live in San Clemente and want a chimney company that inspects, repairs, and restores rather than one that just cleans and leaves, call Supreme Chimney Sweep at (833) 589-8164 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Clemente Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Bethany Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Adam Novak"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Emily Tran