Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Solana Beach
Chimney sweeping in Solana Beach runs $189 – $289 for a standard open-masonry fireplace, and most jobs are completed in under two hours. The real issue along this stretch of coast isn’t creosote, it’s what the salt air does to caps, dampers, and crowns. We work throughout 92075, from the beach blocks west of Highway 101 up through the hills east of I-5. Call (833) 589-8164 and we’ll book an inspection before the marine layer does more damage.
Why Supreme Chimney Sweep Is Solana Beach’s Preferred Chimney Sweep Company
Solana Beach homeowners call us because we stock the parts that fail here most often. Galvanised caps, top-mount dampers, stainless liners. When we open a rusted damper on a 1970s beach block home, we don’t have to schedule a second visit or hand the job to another contractor. We carry the replacement on the truck and install it the same day. That matters when salt spray has eaten through the metal and water is already tracking into the smoke chamber.
We’re led by Brent Calloway, who built Supreme Chimney Sweep around the idea that a sweep who can’t repair what he finds is only doing half the job. Our Chimney Sweep team inspects, cleans, and restores. If we find damage, we fix it. Same visit, same company. No referral to a mason you’ve never met.
Solana Beach’s older single-family homes and low-rise condos, many built between the 1950s and 1980s, have original masonry fireplaces with metal dampers that were never designed for decades of onshore salt. We see the same patterns on Lomas Santa Fe Drive, around Santa Helena, and up near Eden Gardens. The specific failures repeat, and we know what they cost to put right before we open the firebox.
Styles & brands we work with





Gas Fireplace Cleaning in Solana Beach
Gas Fireplace Cleaning in Solana Beach is a different job from wood-burning sweeps, and it’s one we do regularly for homeowners who’ve switched to gas logs or bought a house with a factory-built gas unit that hasn’t been serviced in years. We clean the burner, check the pilot assembly, remove dust and debris from the logs and glass, and inspect the venting for blockages or corrosion. A typical gas fireplace cleaning here runs $149 – $229.
Factory-Built Units Near the Coast
The newer townhomes and condos east of the freeway often have factory-built or direct-vent gas fireplaces. These still need annual service. Salt air corrodes the termination caps and exterior venting faster than inland units, and a blocked or rusted vent on a gas appliance is a carbon monoxide risk, not just a maintenance annoyance.
Older Fireplaces With Gas Log Inserts
Many Solana Beach homes built in the 1960s and 1970s started with wood-burning fireplaces and were later converted with gas log sets. These conversions leave the original masonry flue in place, which means the chimney itself still needs periodic inspection even though no wood is burned. We check the flue, the damper, and the connector, then clean the gas components.
Chimney Maintenance in Solana Beach
Chimney Maintenance in Solana Beach means staying ahead of rust, not creosote. A maintenance visit here includes a visual inspection of the cap, crown, flashing, and damper, plus a sweep of the flue if the fireplace has been used at all. Most maintenance visits run $179 – $259 depending on what we find and how accessible the roof is.
Coastal Corrosion Checks
We check the galvanised parts first. Caps and dampers on Solana Beach chimneys can start rusting within three to five years of installation, especially west of Highway 101 where the salt spray is direct. If a cap is thin or a damper won’t move, we recommend replacing it with stainless before water gets inside the flue.
Crown and Flashing Inspection
The crown is the concrete slab that seals the top of the chimney around the flue. Salt-air moisture keeps masonry damp here, and small cracks in the crown widen every winter. We check for spalling and hairline fractures, and we patch them before water tracks down the smoke chamber and into the walls or ceiling.
Trusted Brands We Service in Solana Beach
We stock and install DuraFlex stainless liners, Gelco caps and dampers, and HeatShield liner resurfacing material. These are the components specialty chimney contractors specify, not big-box substitutes. When a Solana Beach customer needs a new cap because the old galvanised one rusted through, we install a stainless DuraFlex cap the same visit. If a flue liner shows damage but isn’t beyond saving, HeatShield lets us resurface it without the cost of a full re-lining. That’s a repair option most sweep-only companies can’t offer, and it means homeowners in 92075 keep more money in their pockets while getting the right part installed properly.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Solana Beach Homes
- Rusted galvanised caps and dampers: Salt air eats galvanised metal fast. On older beach-block homes, a cap that looked fine two years ago is often rusted through by the time we arrive. The fix is stainless, and we carry it on the truck.
- Bird and squirrel nesting in unused flues: Fireplaces that haven’t burned since the previous owner left are inviting for rodents. We routinely pull squirrel debris and bird nests out of flues in Solana Beach, often when a homeowner calls about scratching sounds or a musty smell.
- Spalling crowns and failed flashing: Moisture from the marine layer keeps masonry damp. Small crown cracks widen, flashing pulls loose, and water tracks down the smoke chamber. By the time you see a water stain on the ceiling, the damage is already in progress.
- Seized top-mount dampers: Salt spray corrodes the hinge and cable. A damper that won’t open or close means the fireplace either can’t draft properly or leaks conditioned air year-round. We free what’s salvageable and replace what isn’t.
Pricing for Chimney Sweep in Solana Beach, CA
A standard open-masonry fireplace sweep in Solana Beach runs $189 – $289. Gas fireplace cleaning is $149 – $229. Level 1 inspections are included with a sweep; a standalone Level 2 inspection, which we recommend when a home has changed hands or the fireplace hasn’t been used in years, runs $299 – $449. If we find a rusted cap or seized damper during the visit, we quote the replacement on the spot with the cost of the part separated from the labor. Estimates are free. Call (833) 589-8164 and we’ll give you an exact number before any work begins.
We Also Serve Cities Near Solana Beach
Our trucks run up and down the coast daily. We serve Del Mar, Fairbanks Ranch, Encinitas, and Rancho Santa Fe, and our Solana Beach customers get the same crew and the same stocked parts whether the job is a sweep on a 1960s beach bungalow or a full liner replacement on a hillside estate.
Serving Solana Beach, CA — Our Local Coverage Area
We’re based in the Solana Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Solana Beach
Annually. The salt air and marine layer corrode metal components even when the fireplace sits cold, so an unused chimney still needs a visual check on the cap, damper, and crown. Call (833) 589-8164 to book an inspection, and we’ll tell you honestly if the fireplace can wait another year.
Because galvanised steel can’t hold up to continuous salt spray. Caps west of Highway 101 in Solana Beach often fail within three to five seasons. The fix is a stainless unit, and we stock DuraFlex caps that won’t rust out the same way.
Usually squirrels, sometimes birds, and either way the debris they pack in is a fire hazard and a blockage. We remove nests and animal material during a sweep, then install a proper cap so they can’t get back in. Soloano Beach’s unused fireplaces are a prime nesting spot, especially in the older beach blocks.
We service both. Gas fireplace cleaning in Solana Beach is a standard call for us, and it includes burner maintenance, vent inspection, and glass cleaning. The venting on gas units corrodes just as fast as wood-burning components here, and a blocked gas vent is a carbon monoxide risk you shouldn’t ignore.
We use DuraFlex for stainless liners and caps, Gelco for dampers and chase covers, and HeatShield for liner resurfacing when a full re-lining isn’t necessary. These are professional-grade components, not hardware-store substitutes, and we keep them stocked for same-visit repairs on Solana Beach jobs.
Written by Brent Calloway, Owner at Supreme Chimney Sweep, serving Solana Beach since the day he first opened a rusted damper on a beach block home and decided the coast deserved better than a sweep-and-leave contractor.